Press and hold the PS4 console’s power button while waiting for the second beep sound to play. This could take some time. Remove the power cable. Disconnect the PS4 console’s non-connecting controller as well. Re-insert the power cable after waiting two to three minutes. Additionally, connect the controller to the console, or another one. To connect your PlayStation 4 controller with a PC, you’ll need to put it in Bluetooth pairing mode. make sure to reset the controller (if already connected to another device) press the "PlayStation" button and the "Share" button together until the lightbar starts flashing white to enter pairing mode. go to your Bluetooth settings on the Changing the Resolution in Safe Mode. Press and hold the power button on your PS4 for seven seconds. This ensures that the PS4 really turns off, which is necessary for starting it in Safe Mode. You will hear one beep when you begin to press and hold the button, and a second after about seven seconds. Here is how to do it: First, hold the “ power button ” on your PS4 console for 5-10 seconds. Once your PS4 is turned off, do the same thing for your controller by holding the “ PS ” button. Now, you will need to completely unplug your PS4 console from the wall outlet. Wait for at least 1 minute, plug the console back and turn it on. Make sure to rename the file with PS4UPDATE.PUP. Turn Off the PS4 and plug in the USB. Press and hold the power button until the PS4 turns on to take your PS4 to safe mode. Click on the “Update System Software” tab and select the file stored in your USB. The update will start once the system scans the file. To do this, simply turn off your PS4 console or navigate to the “Settings” menu and select “Devices,” followed by “Bluetooth Devices.”. From there, choose your controller and select the “Disconnect” option. Once your tablet and controller are prepared, you’re ready to move on to the next step and enable Bluetooth on your tablet. c5OPXc. Here is a very good guide to fix this problem. It suggest some valuable solutions. I advise to try them all in hope to resolve your issue. Try holding down share button first and ps button second.hold them like 5 sec.this will put controller to pairing mod.controller led need to flash rapidly then plug your USB cable. 1. Press the reset button on your controller using a small pin for three seconds. Note: Keep your PS4 turned on and ensure the white light blinks while performing this. 2. Once you’ve reset the controller, turn off your PS4 completely. 3. Now, wait for 2–3 minutes. 4. Connect the controller to your PlayStation 4 and restart the device. The controller doesn't charge and the light on the front of the controller doesn’t turn on. Potential causes include a general firmware malfunction, a faulty battery, a defective charging cable, or a defective controller charging port. View all causes and solutions. 2 Solutions: DualShock 4 Won't Connect to Console

how to connect ps4 controller to ps4 after reset